Minelab F3 Manual de Serviço descarregar pdf (Página 21)

depending on target

metal composition and

depth

Low Battery Indicates batteries do

not have enough

charge to continue

detection

High pitched fast

continuous oscillating

tone

Equipment Fault Indicates failure of

detector component or

a dislodged Red

Sensitivity Endcap

Low pitched slow

oscillating tone (ee-

aww, ee-aww)

Coil Fault Indicates coil not

connected or not

receiving sufficient

current

Low pitched double

tone every five

seconds

Noise Cancel Indicates Noise Cancel

procedure is occurring

Two single beeps

followed by 45 seconds

of short double beeps

finishing with four

single beeps

NOTE

Circuitry within the F3 ensures that its performance remains

consistent as the charge state of the batteries begins to reduce.

When the batteries can no longer supply the necessary power to

sustain correct performance of the detector, a Low Battery Alarm will

alert the operator.

**WARNING**

When Low Battery Alarm occurs the operator must

immediately STOP demining operations. The F3 sh

ould be

switched off and new or recharged batteries inserted into

the Battery Pack (Refer to Section 2.3.e for instruction on

changing batteries).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 48 49

Comentários a estes Manuais

Sem comentários

Minelab F3 Manual de Serviço Página 21

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo Minelab F3