Page 4 The Minelab Eureka Gold
1. Introduction
Congratulations on purchasing Minelab’s Eureka Gold prospecting
detector. The Eureka Gold can constantly and automatically adjust the
Ground Balance to keep it at the correct setting. This will ensure that the
detector is always operating to its optimum strength, reducing operator
fatigue and allowing more ground to be covered in a day’s detecting.
For sensitivity to a wide range of targets, the Eureka Gold has a choice of
three operating frequencies:
• 6.4 kHz
• 20 kHz
• 60 kHz
Further refinements include target detection with pitch variation, better
signal-to-noise ratio in the electronics, and a 10” (25cm) Elliptical
Double ‘D’ coil as standard equipment.
This manual has been arranged with QuickStart instruction for
inexperienced users. More detailed notes about assembling the detector,
how its controls work and methods of detecting are also included and well
worth reading by all operators.
As always at Minelab Electronics, we strive to provide you with the best
metal detection equipment possible. With that in mind we present the
Eureka Gold - the best continuous wave prospecting detector available
today.
If you have any questions or comments we would like to hear from you.
Please contact your local authorised Minelab Dealer or write to us direct.
Since there may be a range of options available in this detector
type, equipment may vary according to the model or country of
issue. Certain descriptions and illustrations may differ (in this
manual) from the exact model that you have purchased. In
addition, Minelab reserve the right to respond to ongoing
technical progress by introducing changes in design, equipment
and technical features at any time.
We wish you every success in your prospecting and treasure hunting.
Page 5 The Minelab Eureka Gold
2. List of Parts
The box in which the Eureka Gold is shipped should contain the following
items. When you first receive your Eureka Gold check that all these items
are in the box:
• Eureka Gold Control Box
• 10” (25cm) Elliptical Coil with Skidplate attached
• 2-Piece Shaft Assembly including fibreglass lower shaft
• Aluminium 2-Piece Armrest (including nuts and bolts)
• Control Box Rear-mounting Bracket
• NiMH Battery Pack
• Mains power NiMH Battery Charger
• Neoprene Armrest Cover
• 2 Piece Armrest Strap
• Velcro Straps (2)
• Teardrop Washers
• Warranty Card
• User Manual
• Detector Stand
Please enter the required details on your warranty card and mail it to Minelab
Electronics Pty Ltd. It is extremely important that we receive your warranty
card within 14 days of date of purchase to register your new detector on
our warranty file.
The following accessories are also available to further improve your
detector:
• 12v NiMH Battery Vehicle Charger
• 11” Round Double ‘D’ Coil
• 15” Spider Double ‘D’ Coil
• Hipmount Bag
• Alkaline Battery pack
• Padded Cordura Detector Transport Bag
• Minelab Cap
• Minelab Polo shirt
• Minelab Jacket
(19 páginas)
(74 páginas)
(47 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais