Minelab GPX5000 Manual de Instruções descarregar pdf (Página 45)

86 87TroubleshootingChoosing the Right Coil for the Job

Continued...

Small,

Shallow

Nugget

Large, Deep

Nugget

Highly

Mineralised

Less

Mineralised

Open

Ground

Heavy

Scrub

Iron

Disc.

10" x 5"

Elliptical

Double D

15” x 12"

Semi-Elliptical

Double D

18” Round

Double D

8” Round

Monoloop

11” Round

Monoloop

15” x 12"

Semi-Elliptical

Monoloop

18” Round

Monoloop

– The shaded areas indicate each coils recommended uses.

– May operate well in Enhance, Fine Gold or Sensitive Smooth timings.

No sound – Check that the detector is on (battery, power cable,

connections and LCD)

– Turn the Threshold control fully clockwise

– Turn the Volume Limit to maximum (20)

– Check that the headphones are plugged in

– Check the volume controls on the headphones

– Try using a different set of headphones or a

different battery

Threshold but no target signal – Try testing different coils with a known target

Random noise – Ground Balance again

– Re tune using the Auto Tune button

– Set the Coil/Rx switch to Cancel

– Reduce Gain

– Move away from other detectors working nearby

– Move away from thunderstorm build-up

Battery will not charge

– Check that there is power to the accessories socket using

vehicle charger

– Check the fuse in the 12V charger plug (M205–5A)

– Check the battery LED patterns (p. 20)

Battery not holding charge – Try an alternative charger adaptor

– Check power cable

– Change the battery

'Coil Overcurrent' screen

appears

– Turn the detector off, wait for a few seconds before

turning it back on again

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51

Comentários a estes Manuais

Sem comentários

Minelab GPX5000 Manual de Instruções Página 45

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo Minelab GPX5000