Minelab Sovereign Elite Manual de Instruções Página 9
- Página / 41
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Instruction Manual Page 9
5. Assembling the Detector
Please follow these instructions to assemble the Sovereign Elite. Refer
to the drawings to identify parts and how they are positioned. Please
contact your Minelab dealer for further instructions should any
difficulties arise.
5.1 Armrest/Upper Shaft Assembly
a) Place the two arm rest halves (4) on
either side of the upper shaft (2) and
ensure that the bolt hole is aligned.
b) Slide the nylon bolts through the bolt
holes and screw the nylon wing nuts
(12) onto the bolts with a couple of
turns (do not tighten).
c) Slide the detector stand (7) into the
runners of the arm rest (4) and tighten the nylon wing nuts by hand.
d) Attach the arm rest straps (6) using the press studs on both sides of
the arm rest.
e) Push the arm rest straps through the slots in the arm rest cover (5) and
push the cover over the arm rest.
5.2 Lower Shaft Assembly
a) Remove the tape on the lower fibreglass
tube (3) that is holding the black teardrop
washers (10) in place.
Note: Ensure the washers do not fall out
after removing the tape.
b) Remove the black nylon wing nut (12), and
bolt (11) from the coil (9).
c) With the teardrop washers in place, push the
lower tube (3) into the coil bracket so that the holes line up.
Figure 2 - Armrest/upper
shaft assembly
6
4
12
5
7
11
2
4
6
Figure 3 - The coil and
lower shaft assembly
12
11
10
3
9
P0044-B
P0570-A
- The Minelab 1
- Sovereign Elite 1
- The Minelab Sovereign Elite 3
- Instruction Manual 3
- 1. Introduction 5
- 5. Assembling the Detector 9
- 5.4 Shaft Mount 10
- 5.5 Rear Shaft Mount 11
- 5.6 Hipmounting/Chestmount 12
- 6. Batteries 13
- 6.4 Using your NiMH Chargers 14
- 7. Control Panel 15
- 7.3 Sensitivity Control 16
- 7.4 Threshold Control 17
- 7.5 Disc/All Metal Switch 18
- 7.6 Disc Control 20
- CONDUCTIVITY 21
- 7.7 Notch Control 22
- ONDUCTIVITY 23
- 7.8 Tone ID Switch 24
- 7.9 Noise Cancel 24
- 7.10 Audio Output 25
- 8.1 Installation 26
- 8.2 Calibration 27
- 9.1 Disc Mode 29
- 9.2 All Metals Mode 29
- 10. Practising the Controls 30
- 11. Treasure Hunting Tips 32
- INCORRECT 32
- 11.1 Pinpointing the Target 33
- 11.2 Recovering the Object 34
- 12. Environmental Concerns 35
- 13. Detector Care 36
- 14. Troubleshooting Guide 37
- 15. Specifications 38
- 16. Warranty and Service 39
- EC Conformity 40
- Minelab Service Repair Form 41
Manuais e produtos relacionados com Medição, teste e controlo Minelab Sovereign Elite
(74 páginas)
(47 páginas)
Medição, teste e controlo Minelab F3 Especificações
(44 páginas)
(44 páginas)
Samsung SHU-D6000S manuals
Owner’s manuals and user’s guides for Unknown Samsung SHU-D6000S.
We providing 1 pdf manuals Samsung SHU-D6000S for download free by document types: User Manual
Comentários a estes Manuais