Minelab X-Terra 705 Manual de Instruções descarregar pdf (Página 26)

The X-Terra 705 is capable of operating at three

dierent transmission frequencies set by VFLEX

compatible coils.

Concentric Standard (7.5kHz)

This frequency is most suitable for general

detecting for most ground conditions. These

coils have a label with the letter M on them.

Concentric Low (3kHz)

This frequency is more suited to searching for

larger, deeper targets, higher-conductivity coins

(eg. most US coins) and has improved ferrous

rejection. These coils have a label with the

letter L on them.

Concentric High (18.75kHz)

This frequency is more suited to searching for

smaller shallow targets, gold nuggets and low

conductivity targets (e.g. hammered coins, ne

jewellery). These coils have a label with the

letter H on them.

Double D (7.5kHz and 18.75kHz)

The Double D coil allows the detector to

ground balance more eectively. It is the ideal

coil for detecting gold nuggets in heavily

mineralised areas or beaches with black sand

concentrates.

To view the type of coil:

Press Menu/Select

to enter the

settings screen.

Press and hold Accept/Reject

to view

the coil identication screen.

Release Accept/Reject

to return

to settings.

Press Pinpoint/Detect

to return to

detection.

Coil Unplugged

The coil is not connected to the detector.

Press and

hold

Release

Once all errors are resolved, the

detector will begin operation with

a blank detection screen.

The X-Terra 705 operates with

Concentric (c) and Double D (d) coils.

Concentric

Standard

Frequency

Concentric

Low

Frequency

Concentric

High

Frequency

Double D

Standard

Frequency

Double D

Low

Frequency

Double D

High

Frequency

49

error messages

48

coil identification

Overload

The detector has received a signal that is too

strong for it to interpret. The letters OL will

appear until signal is no longer too large.

Coil Error

The coil is not communicating

with the control box.

Coil Incompatible

The coil is communicating with the control box

but the detector is not recognising it.

Turn the detector o before connecting a

standard coil.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

Comentários a estes Manuais

Sem comentários